Products
Controllers & Programming
The development of the products involves above all the robot control system; many years of experience has led to the hardware optimization through modular systems along with multi-axes and multi-robot control. The firmware we have developed, of which we can guarantee a continuous efficient implementation, is our feather in the cap as it answers to the customer needs for any automatic spraying application in a perfect and very simple way.
srp
TECHNICAL FEATURES
Robot 5 Axes
Supply voltage 220-440 VAC 50/60 hZ
Power consumption 3 KVA
Interface PC Industriale (Windows)
Display LCD 12" C colori
Sizes 100x100x50 cm
Cabinet weight 230 Kg
Protection degree IP 54
srp
TECHNICAL FEATURES
Robot 6 Axes
Supply voltage 220-440 VAC 50/60 hZ
Power consumption 5 KVA
Interface Windows
Display Mobil Panel 8"
Sizes 100x100x50 cm
Cabinet weight 240 Kg
Protection degree IP 54
srp
TECHNICAL FEATURES
Robot + vision system
Supply voltage 220-440 VAC 50/60 hZ
Power consumption 5 KVA
Interface Windows
Display Industrial PC
Sizes 100x100x50 cm
Cabinet weight 240 Kg
Protection degree IP 54
PROGRAMMING DEVICES
Several methods can be used to program the robots, all of them with an interface on Windows basis and installed on a industrial computer or mobile panel.


Self-learning joystick
srp With these programming devices, the painting cycles can be carried out directly over the pieces, then they are stored and encoded into the computer
Afterwards the programs can be retrieved through an interface with the option to make some changes if required. Moreover, they can be utilized to acquire the data in the Point to Point programming.
- The main controls are:
- Opening of one or more guns
- Start Stop Program storage
- Program storage
- External signals management
- Piece rotation management
- Data acquisition in PTP programming
Mobile Panel

Hardware

System based on a fanless industrial computer and equipped with a 1.6 GHz Intel Mobile N270 processor.
The user interface is displayed on a mobile panel provided with a 416 MHz Intel PXA 270 processor and a Windows CE operating system.
The programming unit is fit out with a 6.5-inch TFT color touch screen and with a 640x480 resolution. It is also supplied with a 3-positions dead-man safety switch for point to point programming, an emergency-stop pushbutton and a key to disable the touch screen. The joystick allows to move all the robots axes and, eventually, the external ones; a USB port is available to save the programs.

Programming unit
Unità di programmazione
In addition to the display, also a keyboard can be used to carry out the most common functions as well as an analogic joystick with 3 degrees of freedom for the manual movement of the robot.